Selecting Printer Options/Defaults (For Windows); Windows Vista/Xp/Server 2003/2000 (Pcl6, Ps) - Konica Minolta BIZHUB C20 User Manual

Selecting Printer Options/Defaults
(for Windows)
Before you start working with your machine, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should "declare" the options in the driver.

Windows Vista/XP/Server 2003/2000 (PCL6, PS)

1
Choose the driver's properties as follows:
– (Windows Vista)
From the Start menu, click Control Panel, then Hardware and
Sound, and then click Printers to open the Printers directory.
Right-click the KONICA MINOLTA bizhub C20 PCL6 or KONICA
MINOLTA bizhub C20 PS printer icon, and then click Properties.
– (Windows XP/Server 2003)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
bizhub C20 PCL6 or KONICA MINOLTA bizhub C20 PS printer icon
and choose Properties.
– (Windows 2000)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA bizhub C20
PCL6 or KONICA MINOLTA bizhub C20 PS printer icon and choose
Properties.
2
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
3
Select the Configure tab.
4
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
5
Click the Refresh to automatically configure installed options.
6
From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
138
The Refresh is available only if bi-directional communication is
available with the machine; otherwise it is grayed out.
If Printer Memory is selected, select 256 MB, 512 MB or
768 MB according to the installed memory. The factory default set-
ting is 256 MB.

Selecting Printer Options/Defaults (for Windows)