Selecting Printer Driver Options/Defaults (For Windows) - Konica Minolta bizhub C10 User Manual

Selecting Printer Driver Options/Defaults
(for Windows)
Before you start working with your machine, you are advised to verify and
change the default printer driver settings if necessary. Also, in case you have
options installed, you should "declare" the options in the printer driver.
1
Choose the driver's properties as follows:
– (Windows XP/Server 2003)
From the start menu, select Printers and Faxes to display the Print-
ers and Faxes directory. Right-click the KONICA MINOLTA bizhub
C10 printer icon and select Printing Preferences.
– (Windows 2000)
From the Start menu, select Settings and then Printers to display the
Printers directory. Right-click the KONICA MINOLTA bizhub C10
printer icon and select Printing Preferences.
– (Windows Vista)
From the Start menu, select Control Panel, and then click Hardware
and Sound to select Printers. Right-click the KONICA MINOLTA
bizhub C10 printer icon, and then select Printing Preferences.
2
If you have installed available options, proceed with the next step. Other-
wise, proceed with step 8.
3
Select the Device Options Setting tab.
4
Check the options that have been correctly identified.
5
Clear the Auto Configure check box.
6
Select an option (one at a time), and then select Installed from Settings.
Installed appears to the right of the option in the Device Options list.
To uninstall an option, select the option to be uninstalled in the Device
Options list, and then select Not Installed from Settings.
7
Click Apply.
Depending on the version of the operating system, Apply may not
appear. If this is the case, continue with the next step.
8
Select the Basic tab. Select the default settings for your machine, such as
the default media format you use.
9
Click Apply.
74

Selecting Printer Driver Options/Defaults (for Windows)

Since Auto Configure is selected as a default with this driver,
installed options are automatically identified. If the options are not
correctly identified, follow the operations described in steps 5
through 7.