Konica Minolta BIZHUB C20 User Manual page 306

This message...
MEMORY FULL
NO DUPLEX PAPER
CLOSE DUPLEX FUNC.
OR CHANGE PAPER SIZE
NO NETWORK SETTING
NO SUITABLE PAPER
LOAD PAPER (xxx)
NON SUPPORT
MEMORY CARD
NOT E-MAIL ADDRESS
292
means...
The machine has
received more data
than can be pro-
cessed with its inter-
nal memory.
Duplex (dou-
ble-sided) printing is
specified, but paper
with a size incom-
patible with duplex
(double-sided) print-
ing is selected.
The network set-
tings had not been
completely specified
when the machine
was switched to
Scan mode.
Paper suitable for
printing is not
loaded in a paper
tray.
A CompactFlash
card not supported
by this machine is
installed.
When the destina-
tion for the scan
data was specified,
a fax number regis-
tered in the favorite
list or as a speed
dial destination or
group dial destina-
tion has been
selected.
Status, Error, and Service Messages
Do this...
Turn the machine off,
and then, after a few
seconds, turn it on
again. Decrease the
amount of data to be
printed (for example,
by decreasing the res-
olution), and then try
printing again.
Switch to simplex (sin-
gle-sided) printing, or
select paper with a size
compatible with duplex
(double-sided) printing.
Before scanning in
Scan mode, specify
the network settings in
the NETWORK SET-
TING and E-MAIL
SETTING menus.
Load paper suitable for
printing into a paper
tray.
Install a
CompactFlash card
supported by this
machine.
Directly type in the
destination for the scan
data, or specify an
e-mail address regis-
tered in the favorite list
or as a speed dial des-
tination or group dial
destination.