Konica Minolta BIZHUB C20 User Manual page 87

TRAY
MAPPING
DUPLEX
COPIES
COLLATE
PS/PCL PRINT Menu
TRAY MAPPING
MD.
LOGICAL TRAY
0-9
Setting
ON / OFF
Select whether or not the Tray Mapping
function is used.
Setting
PHYSICAL TRAY1 /
PHYSICAL TRAY2 /
PHYSICAL TRAY3
Select the tray that is used for printing
when a print job is received from
another manufacturer's printer driver.
The default settings are
for
LOGICAL TRAY1
TRAY1
PHYSICAL TRAY2
PHYSICAL TRAY3
only if an optional lower feeder
unit is installed.
Setting
OFF / LONG EDGE /
SHORT EDGE
If is selected, the pages
LONG EDGE
will be printed on both sides of the
paper for long-edge binding.
If
SHORT EDGE
will be printed on both sides of the
paper for short-edge binding.
The setting specified in the printer driver
will override this menu setting.
Setting
to
1
Specify the number of copies to be
printed.
The setting specified in the printer driver
will override this menu setting.
Setting
ON / OFF
Select whether or not to enable collated
(sort) printing.
The setting specified in the printer driver
will override this menu setting.
PHYSICAL
and
for other trays.
appears
is selected, the pages
(Default:
9999
)
1
73