Checking The Machine Status And Settings; Toner Remaining; Report/Status Menu - Konica Minolta BIZHUB C20 User Manual

Checking the Machine Status and Settings

TONER REMAINING

With the main screen displayed, press the * key to display the TONER
REMAINING screen. From this screen, a general estimate of the amount of
toner remaining in the toner cartridges can be viewed.
To return to the main screen, press the Back key.
If the Select key is held down for at least 2 seconds while the screen
described above is displayed, the configuration page will be printed.

REPORT/STATUS Menu

To display the REPORT/STATUS screen, select
main screen, and then press the Select key. From this menu, the total num-
ber of pages printed by this machine and the results of fax transmissions/
receptions can be viewed. In addition, the reports can be printed. The
REPORT/STATUS menu is structured as shown below.
To return to the previous screen, press the Back key. To display the
main screen, press the Stop/Reset key.
REPORT/STATUS
Checking the Machine Status and Settings
TOTAL PRINT
SUPPLY STATUS
TX/RX RESULT
REPORT
REPORT/STATUS
in the
27