Envelope - Konica Minolta BIZHUB C20 User Manual

Driver
Media Type
Weight
Duplexing
DO NOT use thick stock that is
Mixed with any other media in the trays (as this will cause media misfeed-
ing)

Envelope

Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
You can print continuously with envelope. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Capacity
Orientation Face down
Driver
Media Type
Weight
Duplexing
Use envelopes that are
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
Approved for laser printing
Dry
Print Media
Thick Stock 1
Thick Stock 2
91 to 210 g/m² (25 to 55.9 lb bond)
Not supported
Tray 1
Tray 2/3
Envelope
91 to 163 g/m
Not supported
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Up to 10 sheets, depending on their thick-
ness
Not supported
2 (25 to 43 lb bond)
109