Konica Minolta BIZHUB C20 User Manual page 308

This message...
SCANNER MOTION ERROR
CHECK SCANNER LOCK
SCANNER UNIT OPEN
CLOSE SCANNER UNIT
SERVER MEMORY FULL
SMTP Server
THE PARTY IS FULL
TONER EMPTY
CHANGE x TONER
Toner Low x
Trans. Belt Life
294
means...
The scanner is
locked.
The scanner unit is
open.
The memory of the
SMTP server has
become full.
The maximum num-
ber of 236 destina-
tions for the scan
data has been
reached.
The indicated toner
cartridge has
become empty.
(This message
appears if
TONER
on the
EMPTY
MACHINE SET-
TING menu is set to
STOP.)
The indicated toner
cartridge is low and
should be replaced
within 200 pages at
5% coverage of Let-
ter/A4 paper.
The time to replace
the transfer belt unit
has been reached.
Status, Error, and Service Messages
Do this...
Move the scanner lock
lever to , and then
turn the machine off,
then on again. For
details, refer to
"Unlocking the Scan-
ner" on page 246.
Close the scanner unit.
Free up some space
on the disk, for exam-
ple, by contacting your
server administrator.
Send the data, and
then try scanning
again. Otherwise,
delete unnecessary
destinations before
adding the desired
ones.
Replace the indicated
toner cartridge.
Prepare the indicated
toner cartridge.
Replace the transfer
belt unit.