Konica Minolta BIZHUB C20 User Manual page 61

Manufacturer's default settings appear in bold.
ADMINISTRATOR NO.
REMOTE MONITOR
NETWORK
SETTING
Configuration Menu Overview
TCP/IP
IP ADDR. SET-
TING
DNS DNS
AUTO
SET-
TING
SPEC-
IFY
DHCP
Specify the new administrator access
code.
Setting
/
OFF
Select whether or not setting remote
monitor.
If is selected, technical support can
ON
access the menu mode.
If is selected, technical support
OFF
cannot access the menu mode.
This setting is for technical
support uses. Change the setting
only when it is necessary.
Setting
DISABLE
Select the setting for connecting to this
machine through a network.
Setting
AUTO
Set the address of this printer on the
IP
network.
If is selected, the IP address will
AUTO
be assigned automatically.
If is selected, manually spec-
SPECIFY
ify settings for
IP ADDRESS, SUB-
and
NET MASK GATEWAY
Setting
DISABLE
Select whether or not the DNS server
address is automatically assigned by
the DHCP server.
Specify the DNS server address (up to
three addresses).
The default setting is "0.0.0.0".
Setting
DISABLE
If there is a DHCP server on the net-
work, specify whether the IP address
and other network information is auto-
matically assigned by the DHCP server.
ON
/
ENABLE
/
SPECIFY
.
/
ENABLE
/
ENABLE
47