Replacing an Imaging Unit
When replacing an imaging unit, refer to the following table. For optimum print
quality and performance, use only approved KONICA MINOLTA imaging units
for your specific machine type, as listed in the table below. You can find your
machine type and the imaging unit part numbers on the consumables reorder
label inside the front cover your machine.
Machine
Type
AM
EU
Note
Do not touch the OPC drum
surface. This could lower image
quality.
You are advised to replace the indicated imaging unit when the message
I-UNIT END/REPLACE X
1
Check the message window to see which color imaging unit needs replac-
ing.
204
Machine Parts
Imaging Unit Type
Number
Imaging Unit -Black (K)
Imaging Unit -Yellow (Y)
A0FD 013
Imaging Unit -Magenta (M)
Imaging Unit -Cyan (C)
Imaging Unit -Black (K)
Imaging Unit -Yellow (Y)
A0FD 023
Imaging Unit -Magenta (M)
Imaging Unit -Cyan (C)
Y
appears.
Replacing Consumables
Imaging Unit
Parts Number
A031 00G
A031 05G
A031 0AG
A031 0GG
A031 00J
A031 05J
A031 0AJ
A031 0GJ