Konica Minolta BIZHUB C20 User Manual page 203

6
Press the + or , key to select
Select key.
To search registered names, select
addresses, select
7
Use the keypad to type in the search keyword (maximum of 10 charac-
ters), and then press the Select key.
The search begins, and the search results appear after a while. If no data
matches the search keyword,
onds.
For details on entering/editing text, refer to "Entering Text" on page
323.
Text starting with the first character of the maximum 10 characters
is searched for. Text will not be found if the search keyword is in
the middle of a word.
8
Press the + or , key to select the desired data, and then press the Select
key.
To check the found information, press the
An e-mail address exceeding 64 characters cannot be specified. If
such an e-mail address is specified,
appears for about two seconds, and then the screen for specifying
the destination address appears.
To narrow down the search results, press the Back key, and then
perform step 7 again.
9
If desired, edit the registration name, and then press the Select key.
10
If desired, edit the e-mail address, and then press the Select key.
The settings are registered, and the
again.
Scanning With the Machine
or
NAME E-MAIL
NAME
.
E-MAIL
NOT FOUND
DIAL REGISTER
, and then press the
. To search e-mail
appears for about two sec-
key.
)
ADDRESS IS TOO LONG
menu appears
189