Scanning With the Machine
The machine keys can be used to make scans. This operation differs from
scanning from a computer application since the destination of the scan data
can also be specified.
Before scanning, check that the Scan key is lit up in green. If the key
is not lit up in green, press the Scan key to enter Scan mode.
If, while specifying settings, no key is pressed for the length of time
specified for
celed and the main screen (Scan mode) is displayed.
Basic Scanning Operation
1
Position the document to be
scanned.
2
Press the Scan key to enter Scan mode.
174
AUTO PANEL RESET
For details on positioning
the document, refer to
"Placing a document on
the original glass" on
page 135 and "Loading a
document into the ADF"
on page 136.
, the entered settings are can-
Scanning With the Machine