TVLogic LVM-171WP Operation Manual page 14

L VM- 171W - 171WP
OSD Menu Contents
[1] PICTURE PART
NTSC SETUP
This item sets IRE value in NTSC mode between 0 IRE and 7.5 IRE.
SDI FORMAT
This item selects input SDI format between single mode and dual mode. (Use Dual mode)
SDI SAMPLING
This item selects input SDI sampling mode between YCbCr and RGB. (Use Dual mode)
FILTER
This item selects set the filter ON for smoother transitions between colors.
ORBITER CIRCUIT
This item prevents image sticking effect on LCD Panels when signal input is used. The user may decide
number of pixels to move. The number of pixels should be within range between MIN(0) and MAX(100).
Moving speed is per 10 minutes.
INTERNAL PATTERN
This item generates internal white pattern. The white level select between 0% and 100%
(Per 5% increase or decrease)
FAST MODE
This item minimize de-interlacing processing time delay. If user want to see without 1field time delay,
use this mode.
VGA H POSITION
This item controls VGA H position. It is only available on DVI analog mode.
VGA V POSITION
This item controls VGA V position. It is only available on DVI analog mode.
DITHERING
This item enables dithering to 10 bits.
FORCE psf
This item sets psf mode for psf signals.
FILM MODE DETECTION
This item enables film mode or disables.
DVI INPUT FORMAT SELECT
This item selects color format between RGB and YPbPr. However, it is only available on DVI-DIGITAL mode.
RGB INPUT MODE
This item selects luminance value between RGB255 and RGB235. However, it is
only available on DVI-DIGITAL and HDMI modes.