System Components; Intercom Module - Videx Door Intercom System Technical Manual

SYSTEM COMPONENTS

A system comprises of an intercom panel (which includes the Art.150 module), power
supply, SIM card and antenna. The intercom panel can be customised to the installation
requirements by including proximity access control, coded access or bioaccess and also
including the correct number of call buttons.
ART.150 MODULE
VR4K GSM SPEAKER MODULES (Includes the Art.150)
VR4KGSM-0
JUMPER SETTINGS
There are 2 jumpers located on the back of the module. JP1 & JP2 can be used to alter
the volume from the Door Intercom speaker (In addition to the volume control via
programming codes during a call).
SPEAKER VOLUME
JP1 JP2
A A
B B
PAGE 6 of 36
The intercom panel can be a standard or custom size vandal
resistant panel or could be made up as a modular vandal resistant
panel using modules from the VR4K range. Either way, it will
include the Art.150 GSM module. The GSM module (pictured left)
includes all the GSM communication electronics, SIM card
(Supplied seperately) and connections. A green open LED, a red
busy LED and a yellow speak LED are fitted to the front of this
module to guide the caller thought the call process.
VR4KGSM-1
JP2
B
A
B
A
VR GSM DOOR INTERCOM TECHNICAL MANUAL
VR4KGSM-2
JP3 GAIN (dB)
B 6
B 12
A 18
A 23.5
VR4KGSM-3
VER2.0.0