Advertisement
STEP 9
Connection the cable (50) and at the same time the flat pulley (57) and raised pulley (56):
1. the cable going way as drawing . From one end of cable to the other, you need to fix the raised
pulley (56) and flat pulley (57).
2. how to fix the raised pulley as drawing A :
fix the raised pulley (56) between pulley fixing plate (22) using 2 plastic ring (42), 2 cable guidance
(41), 2 flat washer (101), 1 bolt (112) and 1 nut (102).
3. how to fix the raised pulley as drawing B :
fix the raised pulley (56) into the U shape tube using 2 plastic ring (42), 2 cable guidance (41), 2 flat
washer (101), 1 bolt (112) and 1 nut (102).
4. how to fix the flat pulley in the upper tube as drawing C:
Fix flat pulley by means of bolt (103), plastic ring (42) , busing (65) and nut(102).
5. how to fix the raised pulley in the butterfly arm support as drawing D:
fix the pulley using 1 bolt (108), 2 flat washer (101) and nut (102).
6. connect the upper pulling bar (12) with one of cable (50) using 2 hook (25) and 1 chain (26). And
the other end of cable joined with the weight select bar (18).
D
FIG9
C
B
A
15
Advertisement
