STEP 13
1. attach the reinforce press tube (84) with rear vertical tube (79) and rear stabilizer (78) using 4 bolt
(100), 8 flat washer (101),and 4 nut (102).
2. assembly the arm tube welding set (80) attach to the rear vertical tube (79) using 2 bolt (100), 4 flat
washer (101), 2 nut (102).
3. fix the small back pad (83) onto the arm tube (80) using 2 bolt (104), 2 flat washer (101).
4. assembly 2 arm curl pad (81) with the arm tube by using 4 bolt (104), 4 flat washer (101)
5. fix the handlebar (82) with arm tube by means of 2 bolt(121), 2 flat washer (105).
6. cover the round plastic cap (89) at the end of arm tube.
FIG13
A
x2
19