Advertisement
STEP 8
A
B
C
FIG8
Connection of cable (butterfly arm)(51) and assembly the pulley:
(1) hooking one end of the cable to the right butterfly arm (7) and slide the other end of
the cable along the pulley, at the same time you
need to fix the 1 raised pulley (56) into the 1 single pulley support (20) by 2 plastic ring
(42), 2 cable guidance (41), 2 flat washer (101), 1 bolt (112) and 1 nut (102). Then fix
the single pulley supports onto right butterfly arm by 1 bolt (120), 1 flat washer (101),1
flat washer (105) and 1 nut (110).
(2) after going downward the cable through the double pulley support(19), also, at the
same time you need to fix the raised pulley(56) into the pulley support by using by 2
plastic ring (42), 2 cable guidance (41), 2 flat washer (101), 1 bolt (112) and 1 nut (102).
(3) and then upwards the cable and the other end will be joined to the left butterfly. The
assembly way of left side will be same as the right one.
14
Advertisement
