Assembly The Arm Cable - Insportline ProfiGym C95 User Manual

3. Assembly the Arm Cable (37):

a) Run Arm Cable (37a) through Arm Fixing U (10).
b) Install two Pulleys NO.14&22 (55) to Arm Fixing U (10), using two M10X40mm Hex Bolts (82),
four M10 Washers (93) and two M10 Nylon Nuts (97).
c) Run Arm Cable (37a) under the bolt pre-assembled on Arm Fixing U (10), through Ball (37b), and
wedge the ball end of Cable (37a) to Cable U (50).
d) Install two Pulleys NO.15&21 (55) to two Arms (9), using two M10X40mm Hex Bolts (82), four
M10 Washers (93) and two M10 Nylon Nuts (97).
e) Install two Pulleys NO.16&20 (56) to Arm Fixing Bracket (8), using two M10X40mm Hex Bolts
(82), four M10 Washers (93) and two M10 Nylon Nuts (97).
f) Install two Pulleys NO.17&19 (56) to Base Frame (5), using two M10X40mm Hex Bolts (82), four
M10 Washers (93) and two M10 Nylon Nuts (97).
g) Install Pulley NO.18 (56) to Pulley U (26), using one M10X40mm Hex Bolt (82), two M10
Washers (93) and one M10 Nylon Nut (97).
h) Attach two Strap Handles (43) to two Cables U (50), using two Pothooks (42), two M10X35mm
Hex Bolts (83), four M10 Washers (93) and two M10 Nylon Nuts (97).
NOTE:
Hook the Pothook (42) to either one of the two D-rings on the Strap Handle (43) according to your need.
18