Advertisement
STEP 7
(1) fix the hand grip(68) under to the seat support (6) with 2 bolt (100) , 4 flat washer (101).
And then also assembly the seat (49) onto the seat support (6) by 2 bolt (109) and 2 flat
washer (101). Insert the square plastic cap(36) into the tube (1).
(2) Insert the tube of seat support (6) into the main frame by spring knob(71) to fix. Here you
can adjust the height position of seat to get the suitable position.
(3) Fix the backrest(48) onto the front vertical support using 2 bolt (103) and 2 flat washer
(101).
(4) Thread the foam roller(44) through the leg curler(11),then coat the foam roller with the
foam(44),then fix the round plastic cap to the end of the foam roller.
A
FIG7
13
Advertisement
