Advertisement
(3) and then upwards the cable and the other end will be joined to the left butterfly. The
(3) and then upwards the cable and the other end will be joined to the left butterfly. The assembly way of left
(3) and then upwards the cable and the other end will be joined to the left butterfly. The
side will be same as the right one.
11
STEP
Connection the cable (50) and at the same time the flat pulley (57) and raised pulley (56):
Connection the cable (50) and at the same time the flat pulley (57) and raised pulley (56):
•
the cable going way as drawing . From one end of cable to the other, you need to fix the raised
the cable going way as drawing . From one end of cable to the other, you need to fix the raised pulley
the cable going way as drawing . From one end of cable to the other, you need to fix the raised
(56) and flat pulley (57).
•
how to fix the raised pulley as drawing A :
using 2 plastic ring (42), 2 cable guidance (41), 2 flat washer (101), 1 bolt (112) and 1 nut (102).
using 2 plastic ring (42), 2 cable guidance
•
how to fix the raised pulley as drawing B : fix the raised pulley (56) into the U shape tube using 2
how to fix the raised pulley as drawing B :
plastic ring (42), 2 cable guidance (41), 2 flat washer (101), 1 bolt (112) and 1 nut (102).
plastic ring (42), 2 cable guidance (41), 2
•
how to fix the flat pulley in the upper tube as drawing C:
how to fix the flat pulley in the upper tube as drawing C: Fix flat pulley by means of bolt (103), plastic
ring (42) , busing (65) and nut(102).
•
how to fix the raised pulley in the butterfly arm support as drawing D: fix the pulley using 1 bolt (108),
how to fix the raised pulley in the butterfly arm support as drawing D:
2 flat washer (101) and nut (102).
2 flat washer (101) and nut (102).
•
connect the upper pulling bar (12) with one of cable (50) using 2 hook (25) and 1 chain (26). And
connect the upper pulling bar (12) with one of cable (50) using 2 hook (25) and 1 chain (26). And the
connect the upper pulling bar (12) with one of cable (50) using 2 hook (25) and 1 chain (26). And
other end of cable joined with the weight select bar (18).
other end of cable joined with the weight select bar (18).
ised pulley as drawing A : fix the raised pulley (56) between pulley fixing plate (22)
and nut(102).
fix the raised pulley (56) between pulley fixing plate (22)
(41), 2 flat washer (101), 1 bolt (112) and 1 nut (102).
flat washer (101), 1 bolt (112) and 1 nut (102).
Fix flat pulley by means of bolt (103), plastic
6) into the U shape tube using 2
fix the pulley using 1 bolt (108),
Advertisement
