Advertisement
INSTRUCTION ASSEMBLY:
STEP 1.
(1) Fix the rear stabilizer(2) and 2 weight guidance rods(16) by using 2 flat
washers(101), 2 bolts(115) and 2 foot caps(32).
(2) Fix the rear stabilizer and base frame(1) by using reinforcing board(62),flat
washer(101),nylon nut(102) and bolts(104).
(3) Fix the foot plate fixing beam (10) and front stabilizer(5) by using reinforcing
board(62),flat washer(101),nylon nut(102) and bolts(104), and then assemble the
foot cap(32)and round plastic cap(33) to the foot plate fixing beam(10).
(4) Fix the base frame and front stabilizer by using the fixing plate(73),flat
washer(101),bolts(103 & 100) and nylon nut(102).
FIG1
7
Advertisement
