Ack Character; Nak Character - Datalogic Gryphon I GFS4100 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

ACK Character

This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII
characters or any hex value from 0 to 0xFF can be selected. See
Select ACK Character Setting

NAK Character

This setting specifies an ASCII character or hex value to be used as the NAK character. ASCII
characters or any hex value from 0 to 0xFF can be selected.
Select NAK Character Setting
Product Reference Guide
Setting to previously defined characters such as XON, XOFF, or host com-
mands conflicts with normal operation of these characters. 8-bit data is not
recognized when the option
DEFAULT
Setting to previously defined characters such as XON, XOFF, or host com-
mands conflicts with normal operation of these characters. 8-bit data is not
recognized when the option
DEFAULT
The ACK/NACK Characters must be different and must not contain reserved
Appendix E, Reserved Characters
characters (see
Data Bits
has been set as 7 Data Bits.
0x06 'ACK' Character
See
Data Bits
has been set as 7 Data Bits.
0x15 'NAK' Character
).
ACK Character
page 235 for more information.
page 236
for more information.
29