Gs1 Databar™ Expanded Set Length 2 - Datalogic Gryphon I GFS4100 Product Reference Manual

GS1 DataBar™ Expanded
GS1 DataBar™ Expanded Set Length 2
This feature specifies one of the barcode lengths for
Length 2 is the maximum label length if in
in Fixed Length
from 1 to 74 characters. A setting of 0 specifies to ignore this length (only one fixed length).
Table
setting this feature.
Table 17. GS1 DataBar™ Expanded Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select GS1 DataBar™ Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
180
Mode. Length includes the barcode's data characters only. The length can be set
17
provides examples for setting Length 2. See
00 (ignore second
length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
ENTER/EXIT PROGRAMMING MODE
GS1 DataBar™ Expanded Length
Variable Length Mode, or the second fixed length if
page 256
EXAMPLES
07 Characters 52 Characters
'0' and '7' '5' and '2'
74 = Length 2 is 74 Characters
Gryphon™ I GFS4170/GFS4150-9
Control.
for detailed instructions on
74 Characters
'7' and '4'
CANCEL