Msi Set Length 2 - Datalogic Gryphon I GFS4100 Product Reference Manual

MSI

MSI Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Length
The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
Table
setting this feature.
Table 21. MSI Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select MSI Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
194
Variable Length
Mode. Length includes the barcode's check, data, and full-ASCII shift characters.
21 provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT MSI LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
ENTER/EXIT PROGRAMMING MODE
MSI Length Control
Mode, or the second fixed length if in
page 256
EXAMPLES
07 Characters 15 Characters
'0' and '7' '1' and '5'
50 = Length 2 is 50 Characters
Gryphon™ I GFS4170/GFS4150-9
. Length 2 is the
for detailed instructions on
50 Characters
'5' AND '0'
CANCEL
Fixed