Led Status And Button Operation Table; Printer Driver - idp Smart-30 Technical Manual

Please refer LED status and button operation. SMART-30 shows status messages on watchman that installed with

printer driver.

Watchman
No
INIT Error xx
1
< Retry >
SMART - 30
2
System Ready
S m a r t
3
Unlock Please..
S m a r t
4
Verify your PC
S M A R T
5
Printing!
Print Error xx
6
< Cancel >
Top Cover Open
7
< Eject >
2014-03-24
LED State
Button
RED
Retry Error occur in initializing
Blink
BLUE
Power System Ready Status
On
BLUE
Printer Locked Status
On
BLUE Need to Verify using
On Authenticated PC.
BLUE
In Printing
On
RED Error occur in printing or
Cancel
Blink Moving card
RED Moving
Top Cover Open
Blink Card
상세 설명
Error code is displayed when SMART-30 can't be initialized . Please press
button to re-initialize.
SMART-30 is ready. If you press button, power is turned on or off.
When activating Physical Key option and SMART-30 is locked by the key,
or activating Root/User authentication option and SMART is locked by the
password. Printer is locked so can't be operated
When activating PC authentication option and using SMART-30 in other
PC. Printer can't be operated
SMART-30 is in printing.
Error occur in printing or moving card. If pressing button,, printing will
be canceled.
Top cover is opened. If pressing button, SMART-30 eject card.
1.1 Printer Basic Information
13