idp Smart-30 Technical Manual page 39

Left View
Right View
2014-03-24
T1
T6
T5
T4
T2
1. Before disassembling Main Board,
2. T5 Wire is connected to LCD-Button unit.
3. Disconnect cables(T1, T6) on the Left side.
T3
disconnect cables(T2, T3, T4, T5) on the
Right side.
( Be cautious not to make damage on T4
FFC)
On 3.1.2, when disassembling LCD-
Button unit, T5 was disconnected form
LCD-Button unit, but disconnect T5 Wire
to disassemble Main Board.
3.3 Main PCBs
39