idp Smart-30 Technical Manual page 103

Symptom
Pictures are not smooth or blurred
1 The card surface is not even and it have a faulty
2 The color density is not proper
3 Thermal Print Head surface is contaminated
2014-03-24
Countermeasures
It can be happened when the printing density is set
too low. Increase the printing density value and if the
problem not solved, refer to the below
countermeasures.
※ Refer to the manual 4.1.3.2.
Check the card surface or change to the new card.
Reset the printing density refer to the manual 4.1.3.2.
Clean the Print Head with the cleaning kit.
5.4 Printing Quality
Related Parts
103