Cooling Fan - idp Smart-30 Technical Manual

3.2.3 Cooling Fan

2014-03-24
Cooling FAN
Hook
FAN wire
Connector
M / B
FAN wire
1. Cooling Fan is fixed on Top Cover Frame
by 2 Hooks.
2. Unlock Hooks using screw drive and
disassemble Cooling Fan.
3. Fan Wire is connected to Connector of
Main Board through inside of Printer.
4. Disassemble Bottom Frame from Printer
and disconnect Fan Wire from Connector.
5. Arrange Fan Wire and disconnect. Be
cautious not to peel it by Plate edge.
3.2 Top Cover Unit
36