1.4 Lcd Panel Display & Button Operation - idp Smart Series User Manual

1.4 LCD panel display & button operation
SMART-50 printer can show the real-time process status to user. SMART-30's status is displayed in windows tray.
No LCD Display
Left
Ver X.XX...
1 On
Initialize...
INIT Error xx
2 Blinking
<Replay Replay>
S m a r t
3 On
Auto Ribbon Set
Auto Ribbon Set
4 Blinking
Fail!!!!
Auto Ribbon Set
5 Blinking
Color=xxx(xxx)
S M A R T
6 On
System Ready
Wait.. 1"C
7 Blinking
Temperature=xxx
S m a r t
8 On
Unlock Please..
S m a r t
9 On
Verify your PC
Ribbon Balance
On
10
Type / Remains
S M A R T
11 On
Printing!
LED Button
Right Left Right
On
Blinking Repeat Repeat
On
Blinking
Blinking
Installed
Soft power
On ribbon
ON/OFF
information
Blinking
On
On
On Card out
On
State
Initializing Initializing with the indication of SMART-50 firmware version
Showing error no. in case of failure of normal initializing while
Error during initializing SMART-50 is initialized. (Refer to page13). Press any keys for re-
initializing process.
It optimizes the ribbon position setting automatically in case of the
Automatic ribbon setting
replacement of color ribbon(YMCKO or YMCKOK).
Fail to optimize the
ribbon setting
Display these messages when the auto ribbon setting is failed and
Fail to optimize the
it shows the ribbon detecting level.
ribbon setting and
display the ribbon's color
value
Printer is ready for printing and you can check the installed ribbon
information by pressing the left button. Printer turns off by pressing
Standby
the right button. Printer turns on by pressing the right button when it
turns off.
Printer's operating
Shown it when printer's operating temperature falls down under
temperature is under
1℃. Normal operating temperature is 15℃~35℃.
1℃
Physical key option is active using the CardPrinterSetup utility and
Printer is locked
it shows the locked state. Unable to print.
Authentication option is active using the CardPrinterSetup utility.
PC is not authenticated When use the printer with an unauthenticated PC, it is shown.
Printer is not working.
Display the ribbon type Display the installed ribbon's type and the remains. It can be shown
and remains by pressing the left LED button on the system ready mode.
Printing Under printing.
14
Description