Cli Access For Mac Address Views And Searches - HP Switch 2800 Series Management And Configuration Manual

Monitoring and Analyzing Switch Operation
Status and Counters Data
B-16
Figure B-10. Listing MAC Addresses for a Specific Port
2. Use the Space bar to select the port you want to list or search for MAC
addresses, then press
port.
Determining Whether a Specific Device Is Connected to the Selected
Port. Proceeding from step 2, above:
1. Press (for Search), to display the following prompt:
[S]
Enter MAC address: _
2. Type the MAC address you want to locate and press
highlighted if found. If the switch does not find the address, it leaves the
MAC address listing empty.
3. Press (for Prev page) to return to the previous per-port listing.
[P]

CLI Access for MAC Address Views and Searches

Syntax: show mac-address
[vlan < vlan-id >]
[ethernet]< port-list >]
[< mac-addr >]
To List All Learned MAC Addresses on the Switch, with The Port
Number on Which Each MAC Address Was Learned.
HPswitch> show mac-address
To List All Learned MAC Addresses on one or more ports, with Their
Prompt for Selecting
the Port To Search
to list the MAC addresses detected on that
[Enter]
. The address is
[Enter]