Calls Cannot Be Sent - NEC NEFAX 671 User Manual

8.11 When Faxing Is Not Performed Correctly

Calls Cannot Be Sent

Symptom
Nothing can be heard from the
connected telephone.
After dialing, the ringing cannot
be heard.
After the [Speaker] key is
pressed, it is difficult to hear the
recipient/caller's voice.
The ringing of the telephone is
too low (loud).
Possible Cause
The cord from the
telephone is not connected
correctly to the main unit.
The telephone cord from
the wall jack is not
connected correctly to the
main unit.
Transmitting.
The telephone dialing
system is not set correctly.
The monitoring volume is
too low.
The ringer volume of the
connected telephone is set
too low (loud).
8
Remedy
Correctly connect the
telephone cord to the main
unit.
Correctly connect the
telephone cord from the
wall jack to the main unit.
Check again after the
transmission is finished.
Correctly set the telephone
dialing system. (p. 7-72)
Increase the monitoring
volume. (p. 7-73)
Adjust the ringer volume of
the connected telephone.
8-31