Table of Contents
Advertisement
7.7 Setting Up the Transmission
Tip
If, at any time, you wish to quit setting a "TX OPERATION" function, press the
[No] key. When the message "STOP SETTING?" appears, press the [Yes] key
to quit.
Specifying the Setting for "SCAN CONTRAST"
1
Select the "TX OPERATION".
H
Refer to "Selecting the "TX OPERATION" menu" on page 7-58.
2
Press the [1] key from the 10-Key
Pad to select "SCAN
CONTRAST".
3
Using the [
] and [
select one of the five settings
between "LIGHT" and "DARK",
and then press the [Yes] key.
The "TX OPERATION" menu
appears again.
Specifying the Setting for "RESOLUTION"
1
Select the "TX OPERATION".
H
Refer to "Selecting the "TX OPERATION" menu" on page 7-58.
2
Press the [2] key from the 10-Key
Pad to select "RESOLUTION".
] keys,
7
7-59
Advertisement
Table of Contents
