Table of Contents
Advertisement
9
9.2.3.1 Using the Control Panel To Add Addresses
Specifying the Settings for a One-Touch Dial Key
1
Press the [Utility] key.
2
Press the
REGISTRATION" appears.
3
Press the [1] key on the 10-key pad
to select "ONE-TOUCH DIAL".
4
Press the one-touch dial key where
you wish to add an address.
5
Enter the recipient name.
H
For information on entering text, refer to "Entering Text" on
page 3-18.
H
Up to 20 characters can be
entered for the recipient name.
6
Press the [Yes] key.
7
Enter the e-mail address of the
recipient.
H
For information on entering text,
refer to "Entering Text" on page 3-18.
H
Up to 64 characters can be entered for the e-mail address.
H
If only numbers are entered for the address, it will be regarded as
a fax number.
8
Press the [Yes] key.
H
The [Yes] key cannot be pressed if the e-mail address does not
contain "@".
H
The settings are registered. To add information for other one-touch
dial keys, repeat steps 4 through 8.
9-42
key until "FAX
9.2 Getting Ready
Advertisement
Table of Contents
