Table of Contents
Advertisement
9.2 Getting Ready
Function
SMTP Server Timeout
POP3 Configuration
Function
POP3 Server Address
Account Name
Password
Auto Reception
Reply Address
Port Number
POP3 Server Timeout
Description
This function is used to specify the length of time (30 to 300
seconds) until the connection to the SMTP server times out.
Description
This function is used to specify the IP address or host name of
the POP3 server. (Up to 64 characters)
This function is used to specify the account name used to log
in to the POP3 server. (Up to 64 characters)
This function is used to specify the password associated with
the account name used to log in to the POP3 server. (Up to 32
characters)
This function is used to specify the time interval (between 1 and
60 minutes) for checking e-mail when the Auto Reception
function is enabled.
This function is used to specify the return e-mail address for
error messages. If an error occurs, an error message will be
sent to the e-mail address specified here. Normally, the reply
address is set to the e-mail address of the administrator. (Up to
64 characters)
This function is used to specify the port number for the POP3
server. Normally, port number 110 is used. (1 to 65535)
This function is used to specify the length of time (30 to 300
seconds) until the connection to the POP3 server times out.
9
9-35
Advertisement
Table of Contents
