Specifying The E-Mail Settings - NEC NEFAX 671 User Manual

9.2 Getting Ready
6
Set the power switch for the copier to "2", then "1" to restart the copier.
Specifying the E-mail Settings ("E-MAIL SETTING 1" Menu)
The settings for the E-MAIL SETTING 1 functions are specified from the
"E-MAIL SETTING 1" menu in Utility mode.
This section describes how to specify settings for the following functions.
G SENDER NAME
G E-MAIL ADDRESS
G SMTP SERVER
G SMTP PORT NO.
G
SMTP TIMEOUT
G
TEXT INSERT
G
DEFAULT SUBJECT
Tip
If you wish to cancel a change to a setting before applying it, press the
[No] key. Press the [Yes] key after the message "STOP SETTING?"
appears.
Registering the Sender's Name
1
Press the [Utility] key. The Utility
mode menu screen appears.
2
Press the
MAIL SETTING 1" appears.
3
Press the [1] key on the 10-key pad
to select "SENDER NAME".
4
Enter the sender name.
H For information on entering text,
refer to "Entering Text" on
page 3-18.
H
Up to 20 characters can be entered for the sender name.
or key until "E-
9
[ ]
9-25