NEC NEFAX 671 User Manual page 285

9
Function
Remote Port Number
E-Mail Notification
Function
Enable Notification
Notification Address
Account Information
Function
Anonymous
Private Site
9-40
Description
This function is used to specify the remote port number (1 to
65535) if a proxy server is not being used. Normally, port
number 21 is used.
Description
This function is used to specify whether or not to send an e-mail
notification when scan data is uploaded to an FTP server.
This function is used to specify the e-mail addresses (up to 10)
where e-mail notifications should be sent. (Up to 64 characters)
Description
This function should be selected if the FTP site is an
anonymous FTP server.
If the FTP site requires user authentification, specify settings
for the following.
User Name: The user name (up to 20 characters) used to log
in to the FTP site.
Password: The password (up to 20 characters) associated with
the user name used to log in to the FTP site.
Confirm: Used to specify the password for confirmation.
9.2 Getting Ready