9
9.2.2
Specifying the Network Settings
Depending on the network environment in which the copier is located,
there may be some restrictions on the network functions that the copier
can use. Specify the network settings to suit the functions and
environment required for your configuration.
The network settings can be specified from the control panel of the copier
or using the Administrator mode of Power Web Management Utility.
9.2.2.1 Quick Overview of the Network Settings
Function
2: Required; -: Unnecessary; ●: As necessary
NETWORK SETTINGS
IP ADDRESS
SUBNET
MASK
GATEWAY
9-16
Internet
Description
Faxing
2*2
This function is
used to specify the
IP address for the
copier.
Consult your
network
administrator for
information about
the IP address to
use.
2*2
This function is
used to specify the
subnet mask value
for the network.
Consult your
network
administrator for
details.
2*2
This function is
used to specify the
default gateway
(IP address) of a
router on the
network.
Consult your
network
administrator for
details.
9.2 Getting Ready
Setting
Scan
Scan to
to E-
Control
Server
mail
Panel
2 : Possible
- : Not possible
2*2
2*2
2
2*2
2*2
2
2*2
2*2
2
Power Web
Manageme
nt Utility
2
2
2