Table of Contents
Advertisement
2
Observe the following precautions to maintain the machine in its best possible
condition.
2.1
Installation Precautions
Installation Site
To ensure utmost safety and prevent possible malfunctions, install the machine in
a location that meets the following requirements:
-
A location away from curtains, etc. that may catch fire and burn easily
-
A location that is not exposed to water or other liquids
-
A location free from direct sunlight
-
A location out of the direct airflow of an air conditioner or heater, and not
exposed to extremely high or low temperatures
-
A well-ventilated location
-
A location that is not exposed to high humidity
-
A location that is not extremely dusty
-
A location not subjected to undue vibrations
-
A stable and level location
-
A location where ammonia or other organic gases are not generated
-
A location that does not put the operator in the direct airflow of exhaust from the
machine
-
A location that is not near any kind of heating devices
Power Source
The power source requirements are as follows.
G
Voltage Fluctuation: AC110V -10%, AC127V +6%
G
Frequency Fluctuation: Within ±3Hz
H
Use a power source with as few voltage or frequency fluctuations as possible.
2-2
2.1 Installation Precautions
Advertisement
Table of Contents
