Table of Contents
Advertisement
9.2 Getting Ready
Specifying the POP3 Server Address
1
Press the [Utility] key. The Utility
mode menu appears.
2
Press the
MAIL SETTING 2" appears.
3
Press the [1] key on the 10-key pad
to select "POP3 SERVER".
4
Enter the IP address or host name
of the POP3 server.
H
For information on entering text,
refer to "Entering Text" on page 3-18.
H
Up to 64 characters can be entered for the host name.
H
The DNS settings must have been specified before the host name
for the POP3 server can be specified.
H
The illustration at the right is an example of a host name. Consult
your network administrator for details about this setting.
5
Press the [Yes] key.
The E-MAIL SETTING 2 screen appears.
Specifying the POP3 Port Number ("POP3 PORT NO." Function)
1
From the "E-MAIL SETTING 2"
menu in the Utility mode, press the
[2] key on the 10-key pad to select
"POP3 PORT NO.".
2
Enter the port number for the POP3
server.
H
For information on entering text,
refer to "Entering Text" on page 3-18.
H
The port number can be set between 1 and 65535.
H
Normally, port number 110 is used.
or
key until "E-
9
[ ]
9-29
Advertisement
Table of Contents
