Table of Contents
Advertisement
9
Specifying the Address for Result Notifications
1
From the "E-MAIL SETTING 2"
menu in the Utility mode, press the
[7] key on the 10-key pad to select
"REPLY ADDRESS".
2
Enter the e-mail address to which
error notifications should be sent.
H
For information on entering text,
refer to "Entering Text" on page 3-18.
H
Up to 64 characters can be entered for the reply address.
H
Normally, the reply address is set to the e-mail address of the
administrator.
3
Press the [Yes] key.
The E-MAIL SETTING 2 screen appears again.
Specifying Whether or Not To Print Header Information ("HEADER
PRINT" Function)
1
From the "E-MAIL SETTING 2"
menu in the Utility mode, press the
[8] key on the 10-key pad to select
"HEADER PRINT".
2
Press the
select "ON" or "OFF", and then
press the [Yes] key. The E-MAIL
SETTING 2 screen appears again.
9.2.2.3 Specifying Settings Using Power Web Management Utility
The network settings can be specified using Power Web Management
Utility.
1
Start up Power Web Management Utility.
H
Refer to "Using Power Web Management Utility" on page 9-10.
2
Log in to the Administrator mode.
3
To specify the settings using Power Web Management Utility, click the
appropriate tab and specify the desired settings, and then click the
[Apply] button.
H
If the settings on the Network tab are modified, they are only
9-32
and
keys to
9.2 Getting Ready
[ ]
Advertisement
Table of Contents
