Table of Contents
Advertisement
7.8 Setting Up the Reception
Selecting the "RX OPERATION" menu
1
Press the [Utility] key seven times.
"RX OPERATION" appears.
2
From the 10-Key Pad, press the key ([1] through [9]) for the "RX OPERATION"
function that you wish to set.
H
The "RX OPERATION" functions are as follows:
1 MEMORY RX MODE
2 NO. of RINGS
3 REDUCTION RX
4 RX PRINT
5 RX MODE
6 FORWARD
7 FOOTER
8 SELECT TRAY
9 CLOSED NETWORK
Tip
If, at any time, you wish to quit setting/changing an "RX OPERATION" function,
press the [No] key. When the message "STOP SETTING?" appears, press the
[Yes] key to quit.
To exit the "RX OPERATION" menu, press the [Panel Reset] key. The main
screen appears again.
Utility
7
7-63
Advertisement
Table of Contents
