Table of Contents
Advertisement
9.4 Using Scan to Server (FTP) Operations
9.4
Using Scan to Server (FTP) Operations
Tip
In order to perform this operation, an FTP server address must have
already been specified. Use Power Web Management Utility to specify
the settings. (Refer to "File Destination Setting" on page 9-38.)
A specified recipient can be notified by e-mail of the FTP server
address where a file was uploaded. This setting can be specified using
Power Web Management Utility. (Refer to "File Destination Setting" on
page 9-38.)
To cancel a job while the document is being scanned, press the [Stop]
key.
If the job could not be sent, a transmission result report is printed.
To delete a job after it has been scanned, but is still in the queue,
waiting to be sent, press the [Function] key, and then select "CANCEL
RESERV.". (Refer to "Canceling (Deleting) a Document Queued in the
Memory for Transmission" on page 6-19.)
9
9-67
Advertisement
Table of Contents
