Table of Contents
Advertisement
9
SMTP & POP3 Configuration
SMTP Configuration
Function
SMTP Server Address
Default Subject for E-mail
Attachment
Sender name
E-Mail Address
Port Number
9-34
Description
This function is used to specify the IP address or host name of
an SMTP server. (Up to 64 characters)
This function is used to specify the default subject line when
sending scan data as an e-mail attachment. (Up to 20
characters)
This function is used to specify the sender's name when
sending scan data as an e-mail attachment. (Up to 20
characters)
This function is used to specify the sender's e-mail address
when sending scan data as an e-mail attachment. (Up to 64
characters)
Always enter the e-mail address of the sender, not that of the
copier itself.
This function is used to specify the port number for the SMTP
server. Normally, port number 25 is used. (1 to 65535)
9.2 Getting Ready
Advertisement
Table of Contents
