Table of Contents
Advertisement
9.4 Using Scan to Server (FTP) Operations
5
Press the
the color mode ("COLOR" or "B/W"),
and then press the [Yes] key.
6
Press the
the resolution (150× 150 dpi,
300× 300 dpi, or 600× 600 dpi), and
then press the [Yes] key.
H
The 600× 600 dpi resolution cannot be selected if "COLOR" was
selected as the scan mode in step 5.
H
To specify detailed settings for the scan mode, press the
H
For information on specifying detailed settings, refer to "Changing
the Scan Mode Settings" on page 9-59.
7
Press the [Start] key.
Scanning starts, then the scan data
is sent to the recipients.
H
To change the size of the scanned image, press the
H
For information on changing the size, refer to "Changing the
Scanned Image Size" on page 9-60.
Tip
Up to 10 specified recipients can be notified by e-mail of the FTP
server address where a file was uploaded. When using Power
Web Management Utility to register the speed dial information,
select "Enable Notification". (Refer to "Adding a New Speed Dial
(FTP Server) Setting" on page 9-53.)
and
keys to select
and
keys to select
9
key.
key.
9-69
Advertisement
Table of Contents
