Inter-Function Delay; Hid Character Transmit Mode - Equator S-2 Metapace Hardware Manual

2.6.3 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254,
to match the computer response time of the keyboard interface. Such delay time is
inserted between every function code (0x01 ~ 0x1F) being transmitted. The longer the
delay time is, the slower the transmission speed will be.
Value Delay Time
0 Disable
1 ~ 14 10 millisecond
15 ~ 24 20 millisecond
25 ~ 34 30 millisecond
35 ~ 44 40 millisecond
45 ~ 54 50 millisecond
... ...
1) Read the label above to specify the inter-function delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" label on the same page to complete this setting.

2.6.4 HID CHARACTER TRANSMIT MODE

By default, HID interface sends data to the host in batch. You may have the scanner read
the "By Character" label to process data one character at a time.
*Batch Processing
Inter-Function Delay ... (*0 ~ 254)
Value" label on page 192 for the desired inter-function delay
Chapter 2 Selecting Output Interface
Value Delay Time
195 ~ 204 200 millisecond
205 ~ 214 210 millisecond
215 ~ 224 220 millisecond
225 ~ 234 230 millisecond
235 ~ 244 240 millisecond
245 ~ 254 250 millisecond
Update
By Character
81