Connect To Dongle - Equator S-2 Metapace Hardware Manual

Metapace S-2 Hardware Manual

3.2.3 CONNECT TO DONGLE

The procedure goes through associating devices for establishing a WPAN connection,
which is pretty much the same except for the software you are using. If your computer is
® ® ®
running Microsoft Windows XP Service Pack 3 (SP3) or Windows Vista Service Pack 1
®
(SP1), you can use the generic software support that Windows includes, or you can use
the driver that the device manufacturer provides. Now, let's try using the generic
®
software support that Windows XP Service Pack 2 includes.
BT HID Procedure
By default, BT HID is activated on the scanner, and the keyboard type is set to PCAT (US). When
BT HID is re-activated, you will have to select a keyboard type to complete this setting.
The procedure is the same as for BT SPP. Refer to steps 1~11 below.
BT SPP Procedure
®
1. Turn on the Bluetooth function on your computer, running Windows XP SP2.
®
2. Double-click the Bluetooth icon from the lower right of the taskbar.
Alternatively, you may go to Control Panel > Bluetooth Devices.
3. Click [Add] to search devices nearby.
92
Enter Setup