Start/Stop Transmission; Clsi Conversion - Equator S-2 Metapace Hardware Manual

Chapter 4 Changing Symbology Settings

4.1.2 START/STOP TRANSMISSION

Decide whether to include the start/stop characters in the data being transmitted.
Transmit Codabar
Start/Stop Characters
*Do Not Transmit

4.1.3 CLSI CONVERSION

When enabled, the CLSI editing strips the start/stop characters and inserts a space after
the first, fifth, and tenth characters of a 14-character Codabar barcode.
Apply CLSI Editing
*Do Not Apply
Note: The 14-character barcode length does not include start/stop characters.
101
Update