Prefix/Suffix Code - Equator S-2 Metapace Hardware Manual

5.3 PREFIX/SUFFIX CODE

By default, there is no prefix code, and [ENTER] or [CR] (Carriage Return) is configured
to be suffix code. Up to 8 characters can be configured, for example, "Barcode_", and
you will have the string
"Barcode_1234567890".
If "BT HID", "USB HID" or "Keyboard Wedge" is configured for interface,
and Key Status
Key Status when "Normal Key" is selected for Key Type. Refer to
Keyboard Wedge
Key Type
Scan Code Up to 4 scan code values are allowed.
Normal Key Up to 8 character strings are allowed.
Configure Prefix
1) Read the label above to apply prefix code or suffix code separately, and follow steps
2~3. (Max. 8 characters each)
2) Read the "Hexadecimal
example, read "2" and "B" for the scanner to prefix or suffix the character [+].
3) Read the "Validate" label to complete this setting.
appear
will then become applicable. You may decide whether or not to apply
Table.
Value" label on page 193 for the desired character string. For
Chapter 5 Defining Output Format
in front of the
Key Status
N/A
Add Shift
Add Left Ctrl
Add Left Alt
Add Right Ctrl
Add Right Alt
Add Break
For example, read labels for [Add Shift],
[A], [Add Shift], and [B].
Update
barcode read, like
Appendix II
Configure Suffix
this –
Key Type
145