Example - Equator S-2 Metapace Hardware Manual

EXAMPLE

KEY TYPE = NORMAL
For example, if you want to program the character "!" as the prefix code:
1. Read the "Configure Prefix" label.
2. Read the "Hexadecimal
3. Read the "Validate" label to complete this setting.
KEY TYPE = SCAN CODE
For example, if you want to program the character "a" (= "1C" on the scan code table) as the
prefix code:
1. Read the "Configure Prefix" label.
2. Read the "Scan Code" label.
3. Read the "Hexadecimal
4. Read the "Validate" label to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = SHIFT
For example, if you want to program the character "!" (= "Shift" + "1" on keyboard) as the prefix
code:
1. Read the "Configure Prefix" label.
2. Read the "Add Shift" label.
3. Read the "Hexadecimal
4. Read the "Validate" label to complete this setting.
Value" label on page 193 for "2" and "1".
Value" label on page 193 for "1" and "C".
Value" label on page 193 for "3" and "1".
Appendix II Keyboard Wedge Table
Update
191