Setting Up The Cradle - Equator S-2 Metapace Hardware Manual

SETTING UP THE CRADLE

Capable of charging the Metapace S-2 scanner, the cradle is specifically designed for the
scanner to communicate with a host computer wirelessly. The connection between the
Metapace S-2 scanner and the cradle is made easy and reliable. Refer to
to the Cradle. The cradle is also for use with the scanner when set to Auto-Sense mode.
Two LED indicators are provided for communications status and battery charging status.
Power LED
Red,
solid
---
Communication LED
--- Blue,
solid
Red, ---
solid
Red, Blue,
solid flashing
Red, Blue,
flashing flashing
--- Blue,
flashing
Meaning
Power ON
Power OFF
Meaning
Initialize
Failed to establish a USB connection
Serial command mode with USB Virtual COM or RS-232: wait 3 seconds for
starting a serial command
Serial command mode with USB HID: wait 3 seconds for pressing [Num
Lock] or [Caps Lock] 5 times via keyboard
Wait for connection request from the scanner (Slow flash at 0.5 Hz)
Update
Introduction
3.1.1 Connect
3