Metapace S-2 Hardware Manual
5.5 LENGTH CODE
A two-digit code representing the length of barcode data (character count) can be
inserted in front of data being transmitted. Such "Length" code can be individually
enabled or disabled for each symbology.
Length Code for Codabar
Apply
Length Code for Code 39
Apply
Length Code for Code 93
Apply
Length Code for Code 128
Apply
Length Code for GS1-128 & GS1 DataBar
Apply
Length Code for ISBT 128
Apply
150
*Do Not Apply
*Do Not Apply
*Do Not Apply
*Do Not Apply
*Do Not Apply
*Do Not Apply
Enter Setup